Apartment gut renovations and office strip-outs handled with dust containment, daily debris removal, and scheduling that respects your building and your neighbors.
Interior demolition strips a space down to its structural shell, removing walls, flooring, ceilings, cabinetry, and fixtures while leaving the building's exterior and structure intact. It is the step before almost every apartment renovation, office build-out, or commercial fit-out in the Bronx. Our interior demolition contractors handle single apartments, full-floor gut renovations, and office strip-outs across every neighborhood in the borough.
Because this work happens inside occupied buildings, containment and communication matter as much as the demolition itself. Before any wall comes down, we walk the space, confirm what is structural versus non-structural, and plan how to protect hallways, elevators, and neighboring units for the duration of the project.
Here is what interior demolition contractors typically walk you through from the first call to a clean, gutted space:
We confirm the scope of work, identify shared walls and structural elements, and install floor and hallway protection before demolition begins.
Electrical, plumbing, and gas fixtures within the work area are safely disconnected and capped ahead of demolition.
Non-structural walls, flooring, ceilings, cabinetry, and fixtures are removed down to the shell, room by room.
Plastic sheeting and negative air machines keep dust out of occupied areas, and debris is bagged and removed daily rather than left to pile up.
The space is swept clean and handed off ready for your renovation or build-out crew to begin.
Interior demolition is typically the first step for these kinds of Bronx projects:
Many interior demolition and gut renovation projects require an Alteration Type 2 permit filed with the NYC Department of Buildings, which covers renovations that do not change a building's use or occupancy. New York State law requires an asbestos survey before any demolition or renovation work begins, regardless of when the building was constructed.
In co-ops, condos, and multi-family rentals, building management usually requires a certificate of insurance and a set work schedule before a strip-out can start, and many Bronx buildings restrict construction noise to specific weekday hours. When a building stays occupied during the project, we put a tenant protection plan in place so hallways, elevators, and neighboring units stay safe and usable throughout the work.
Most apartment and small office strip-outs in the Bronx take a few days to two weeks, depending on square footage, the materials being removed, and whether the building requires after-hours or weekend-only work.
Many interior demolition and gut renovation projects in New York City require an Alteration Type 2 permit filed by a licensed architect or engineer, along with an asbestos survey, which state law requires regardless of when the building was constructed.
We contain dust with plastic sheeting and negative air machines, protect hallways and elevators, and remove debris daily so shared spaces in your building stay clean and usable throughout the project.
Yes. Office strip-outs are one of our most common interior demolition projects, from removing partition walls and dropped ceilings to clearing a space down to the shell for a new build-out.
Our free on-site estimate covers scope of demolition, dust containment measures, debris removal, and an expected timeline, so you know what to expect before work begins.
Call now or request a free on-site estimate for your Bronx property.
Call 718-808-6203Photo credits: Interior gut demolition photo by Vincenzo Cassano on Unsplash.